相关文章

净化铝材配件-防护手套的正确选用是关键

1. 防护手套的品种很多,要根据防护功能来选用。首先应明确防护对象,然后再仔细选用。如耐酸碱手套,有耐强酸(碱)的、有耐低浓度酸(碱),而耐低浓度酸(碱)手套不能用于接触高浓度酸(碱)。切记勿误用,以免发生意外。

1 varieties of protective gloves, according to the protection function to choose. First of all, should be clear to protect the object, and then carefully selected. Such as acid and alkali resistant gloves, resistance to strong acid (base), tolerance to low concentration acid (alkali), and tolerant to low concentration of acid (alkali) gloves may not for exposure to high concentration of acid (alkali). Remember not to misuse, so as to avoid accidents.

2. 防水、耐酸碱手套使用前应仔细检查,观察表面是否有破损,采取简易办法是向手套内吹口气,用手捏紧套口,观察是否漏气。漏气则不能使用。

2 waterproof, acid and alkali resistant gloves should be carefully checked before use, observe whether the surface is damaged, to take a simple way is to blow the glove inside the glove, hand pinch tight set, observe whether the leakage. Can not use the air leakage.

3. 绝缘手套应定期检验电绝缘性能,不符合规定的不能使用。

3 insulated gloves should be regularly tested for electrical insulation properties, does not meet the requirements of the use of.

4. 橡胶、塑料等类防护手套用后应冲洗干净、晾干,保存时避免高温,并在制品上撒上滑石粉以防粘连。

4. Rubber, plastic and other kinds of protective gloves after use should be washed clean, dry, save to avoid high temperature, and WIP sprinkle talcum powder to prevent adhesion.

5.接触强氧化酸如硝酸、铬酸等,因强氧化作用会造成防护手套发脆、变色、早期损坏。高浓度的强氧化酸甚至会引起烧损,应该注意观察。

5 contact with strong oxidizing acid such as nitric acid, chromic acid, due to strong oxidation will cause the protective gloves crisp, discoloration, early damage. High concentrations of strong oxidizing acids may even cause burning, should observe.

6.乳胶工业手套只适用于弱酸、浓度不高的硫酸、盐酸和各种盐类,不得接触强氧化酸(硝酸等)。

6 latex industrial gloves are only suitable for weak acid, the concentration of sulfuric acid, hydrochloric acid and a variety of salts, not contact with strong oxidizing acids (nitric acid, etc.).

在净化铝材配件

In the purification of aluminum parts, workers will encounter a variety of live operation. According to the actual working voltage to select the appropriate electrical insulation gloves, and in the actual operation, should be used in electrical and external gloves with electrical insulation gloves to use, in order to better protect puncture and tear of the damage. Every time the use of electrical insulation gloves should be carried out before and after the necessary checks to ensure the safety of the use of.

2 aluminum sleeves: cloth insulation for high temperature furnace and other strong thermal radiation environment.

4 plastic sleeves: anti acid used in contact with water, acid and alkali, dirt and other operations.